HYDRAULIC CYLINDERREPAIR THAT KEEPSYOU MOVING
Veteran-owned hydraulic cylinder repair for heavy equipment, fleets, and commercial operations across Montgomery, Conroe, Magnolia, The Woodlands, and North Houston.
Built for uptime,
tested before return.
Cylinder repacking, component repair, and service support for equipment that cannot sit idle.
CAN'T AFFORD DOWNTIME
BUILT PRECISE.
BUILT TO PERFORM.
★ VETERAN-OWNED & OPERATED ★
American Grit. Military Standards.
Your Equipment, Running.
When you choose Vetech, you're supporting a veteran who will work for you the same way he served this country — with everything he's got.
WE EARN YOUR TRUST
We don't coast on credentials. Every repair is another chance to prove we're worth your business. You'll know it's right before it leaves the shop.
WE SHOW UP
Mission-ready work ethic. When your equipment is down, we treat it like the emergency it is. Fast, honest, no runaround.
WE STAND BEHIND IT
Pressure-tested before return. If it's not right, we make it right. That's not a policy — that's how we were trained.
Your support keeps an American veteran in business.
We don't take that lightly. Every job is an opportunity to prove it was worth your trust.
U.S.
VETERAN
100%
PRESSURE TESTED
EVERY
JOB GUARANTEED
Our Repair Process
Simple, transparent, and efficient.
Check-In & Inspect
Receive cylinder, clean, measure, and inspect components to identify the root cause of failure.
Quote & Approve
You get a clear estimate for seals, parts, and labor before we move forward.
Repack / Rebuild
Replace seals, wear items, and perform any required machining or rod/barrel work.
Test & Deliver
Pressure test, verify smooth operation, and return your cylinder ready to reinstall.
CORE HYDRAULIC SERVICES
Cylinder Repair Built for Heavy Equipment, Fleets, and Job Sites
Fast turnarounds, tested repairs, and practical service options for commercial operators who need hydraulic equipment back in the field.
Seal replacement
Rod & component work
Cylinder & Component Repair
Minor rod refinishing and polish for better seal life and we also weld and polish any damaged components to extend service life.
Job-site support
Mobile / On-Site Service
Pickup, delivery, or mobile pull/install options to minimize your equipment downtime.
RECENT REPAIR WORK
Built for Heavy Equipment. Restored for Reliability.
From cylinder rebuilds and repacking to rod repair, pressure testing, and fleet turnaround, Vetech Hydraulics brings veteran-owned workmanship to commercial equipment that needs to get back in service with confidence.
Pressure Tested
Excavator
Excavator Boom Cylinder Rebuild
Full teardown, seal replacement, rod cleanup, and bench pressure testing before return to the fleet.
Repacked
Fleet Truck
Fleet Dump Cylinder Repack
Commercial cylinder repack focused on leak control, fast turnaround, and dependable daily route uptime.
Rod Polished
Wheel Loader
Loader Rod & Gland Repair
Rod finish inspection, component repair, and seal-fit checks to improve service life under heavy load.
Weld Repaired
Construction Equipment
Job-Site Pull, Repair & Return
Pickup coordination, shop rebuild, and return support for operators who need equipment moving again quickly.
Need a Hydraulic Cylinder Rebuilt?
Send details, photos, or fleet requirements and we will help map the fastest path to a dependable repair.
COMMERCIAL HYDRAULIC SUPPORT
Supporting Fleets, Heavy Equipment, and Industrial Operations Across North Houston
Vetech Hydraulics supports commercial hydraulic cylinder repair needs with fleet uptime, fast turnaround, and reliable service for contractors, municipalities, equipment owners, and industrial operators — backed by veteran-owned professionalism and clear communication.
Trash Trucks
Cylinder repair support for waste and recycling fleets where route uptime matters every day.
Construction Equipment
Repair support for loaders, excavators, skid steers, lifts, and job-site hydraulic equipment.
Agriculture Equipment
Practical cylinder service for tractors, implements, loaders, and ranch or farm machinery.
Utility / Municipal Fleets
Reliable repair coordination for public works, utility crews, and municipal equipment programs.
Industrial Equipment
Hydraulic cylinder repair for shop, plant, logistics, manufacturing, and material-handling operations.
Field Service Support
Pickup, delivery, and mobile pull/install options to help reduce downtime when equipment cannot sit idle.
COMMERCIAL RELIABILITY
Built Around Uptime, Reliability, and Professional Service
Vetech Hydraulics helps minimize downtime with pressure-tested repairs, clear communication, fast turnaround, and veteran-owned professionalism backed by commercial accountability.
Pressure Tested Repairs
Cylinder repairs are checked for leak-free performance before return so operators can reinstall with confidence.
Fast Turnaround
Repair coordination is built around reducing downtime and getting critical equipment back in service faster.
Veteran-Owned Service
Professional communication, accountability, and disciplined workmanship guide every customer interaction.
Fleet & Heavy Equipment Experience
Support for construction equipment, waste fleets, municipal units, loaders, excavators, and industrial machinery.
Pickup & Delivery Options
Practical logistics support helps contractors and fleet managers keep repair work moving without unnecessary delays.
Commercial-Grade Workmanship
Every rebuild is approached with the reliability standards expected by crews, operators, and commercial accounts.
Why Choose Vetech Hydraulics
Built for contractors, fleet managers, and operators.
01
Veteran-Owned & Operated SDVOSB Certified
Hands-On Cylinder Expertise
02
Leak-Tested
Before Delivery
03
Pickup
and Delivery Options
04
Warranty
On All Repairs
Common Hydraulic Cylinder Failures We See Every Day
What typically goes wrong — and how we fix it.
Hydraulic cylinders work hard on trash trucks, excavators, skid steers, farm equipment, and industrial machines. Over time, heat, contamination, misalignment, and heavy use start to show up as the same repeat failures:
Seal Failures & Leaks
Worn or damaged seals cause internal bypassing, external leaks, loss of power, and contamination. Age, wrong seal material, high temps, and scored rods/barrels all speed up seal failure.
Bent Rods & Scored Barrels
Side loading or poor alignment can bend rods and scratch the inside of the barrel. Once sealing surfaces are damaged, seals wear out quickly and leaks follow.
Rod Pitting & Corrosion
Outdoor and corrosive environments eat away at chrome. Pitting and rust tear seals, weaken the rod, and often require reconditioning or replacement.
Piston Wear & Misalignment
When a cylinder is misaligned or running dry, the piston can wear unevenly and score the barrel. That leads to loss of efficiency, weak stroke, and shortened service life.
Slow or Erratic Operation
Cylinders that feel slow, jerky, or inconsistent are often dealing with low system pressure, fluid contamination, or internal bypassing from worn internal parts.
At Vetech Hydraulics, we don’t just throw seals at the problem. We look at why the cylinder failed so we can rebuild it to last longer and help you avoid repeat downtime.
Our Cylinder Repair Capabilities
From small-bore to large telescopic cylinders.
Repair Standards
Disassembly & Inspection
Every cylinder is fully torn down, cleaned, and inspected. We measure rods, pistons, barrels, and glands to find the true root cause of failure — not just the symptoms.
Machining & Restoration
We handle rod polishing, rod straightening, barrel honing, thread repair, custom component fabrication, and more. Older or discontinued cylinders can often be saved with in-house machining.
Seal Selection & Replacement
We install high-quality seals matched to your pressure, temperature, and fluid type — so your repair holds up in real-world conditions.
Quote & Uptime Support
Reassembly & Pressure Testing
Once rebuilt, each cylinder is reassembled to spec and pressure-tested under load. We verify smooth operation, correct stroke, and leak-free performance before it goes back in service.
Fast Turnaround Times
Downtime is expensive. We move quickly — especially for local contractors, trash fleets, and equipment owners who need cylinders turned around in days, not weeks.
Photo & Measurement Quotes
Text or email a photo and some basic dimensions, and we can usually give you a ballpark estimate before you even bring the cylinder in.
Repair vs. Replacement
Helping you make the right call for your equipment and budget.
Preferred when practical
When Repair Makes Sense
In many cases, repairing your hydraulic cylinder is faster and more cost-effective than replacing it:
Seal leaks, minor rod pitting, and surface wear that can be corrected.
When OEM replacements are back-ordered or discontinued.
When you need a quick turnaround to get equipment back in service.
For most cylinders we see, a proper rebuild gives you years of additional service at a fraction of the cost of new.
Honest replacement guidance
When Replacement is the Better Option
Sometimes, a cylinder is too far gone, or the numbers simply don’t add up:
Severe barrel cracking or structural damage.
Rods that are heavily bent or beyond safe repair.
When repair cost approaches or exceeds the cost of a quality replacement.
We’ll walk you through both options with honest pricing, so you can decide what’s best for your operation — not ours.
Quality, Testing & Reliability
Your cylinders run under extreme pressure — we treat them that way.
QA 01
Pressure Testing
Every repaired cylinder is pressure-tested to verify it holds and performs at proper operating pressures, with no leaks or bypassing.
QA 02
Micron-Level Measurements
We check rod, barrel, and gland tolerances with micrometers and bore gauges to ensure components are in spec and will support long-term seal life.
QA 03
Clean Seal Installation
Seals are installed in a clean, controlled area to reduce contamination — a leading cause of early failure.
QA 04
Documentation on Request
Need proof for your QA system or customer? We can provide test notes and repair details so you have a record of what was done.
Service Areas
Local pickup and delivery available.
Primary Service Corridor
Montgomery • Conroe • The Woodlands • Magnolia • Tomball • Spring • Willis • New Caney • Splendora • Humble • Atascocita
Additional Coverage Areas
Millican • Navasota • Washington • Anderson • Apolonia • Richards • Whitehall • Fields Store • Hempstead • Prairie View • Pine Island • Buckhorn • Waller • Plantersville • Pinebrook • Todd Mission • Fetzer • Bobville • Karen • Pinehurst • Stagecoach • Rose Hill • Kohrville • Porter Heights • Grangerland • Klein • Westfield • Panorama Village • Ada • Waverly • New Waverly • Patton Village • Roman Forest • Plum Grove • Cleveland • North Cleveland • Westcott • Eastgate • Huffman
Key Industries We Support
Waste & Recycling, Construction, Agriculture, Logistics, Manufacturing and other hydraulic equipment operators across the Lake Conroe / North Houston region.
Typical service radius for pickup, delivery, and on-site support. If you're near this map, there's a good chance we can help.
Ready to Get Your Cylinder Fixed?
Send a picture for a fast quote.
FAQ
Hydraulic cylinder repair costs vary widely, from $200-$400 for simple reseals (kits $20-$150, labor $100-$200+) to several hundred or even over $1,000 for complex telescopic cylinder repair, re-chroming, or tube re-sleeving, with shop labor often $120-$160/hour plus parts. At Vetech Hydraulics, we try to provide a fair price for our customers so we stay at a price range that does not exceed 50% of the cost of OEM cylinder replacement. Each cylinder is unique, so we recommend getting a detailed quote based on your specific needs.
Typical 24–72 hours depending on parts availability and queue. Emergency service available.
Yes. Every repair is pressure tested to verify no leaks and proper operation.
We offer pickup and delivery in Montgomery County and surrounding areas. Mobile pull/install options available.